Best 28052 Gas Shock in 2022 [*Top Picks*]

Looking for the best 28052 gas shock on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.

656 Reviews Scanned

  • 2 Truck Upfitters 16
    Bestseller #1
    2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings! (141)
      CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation. Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys. These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install. Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
  • 10 Inches 35 Lb/156N Gas Shocks Struts Lift Supports Compatible with Truck Pickup Tool Box Lid RV Door, Set of 2 Vepagoo
    Bestseller #1
    10 Inches 35 Lb/156N Gas Shocks Struts Lift Supports Compatible with Truck Pickup Tool Box Lid RV Door, Set of 2 Vepagoo (1076)
      【Parameter】Extended Length: 10.00 Inches,Compressed Length: 6.6 Inches,Force: 156N/35 Lbs Per Shock. 【Part Number】4058,4058,8195695,012170,7835PB,40231035,40231540,SL10-35,ML10-35,SL-1035,SL-10-35,ML-10-35,SL10-35-1,SL-10351,SL-10-35-1,SL10-35-5,SL-10355,SL-10-35-5,SL30-35,ML30-35,SL-3035,ML-30-35,SL-30-35,SL30-35-1,SL-30351,SL-30-35-1,SL30-35-5,SL-30355,SL-30-35-5,SL1035,SL10351,SL10355,ML1035,SL3035,SL30351,SL30355,ML3035,RB8795961,95961. 【Content】Package arrive with ONLY 2 shocks without mounting bracket and screws. 【Most used for】10in gas shock strut spring is the best replacement parts for Truck Toolbox, Wooden Box, ATV Vehicles, Cabinets lid or door, RV Vehicles, and many other DIY applications. 【12+1 MONTHS REPLACEMENT SERVICE】Welcome to Click "Ask Seller" BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
  • OTUAYAUTO 16 Inch Lift Support - 169N/38Lbs Universal Gas Strut - Replacement for Truck Cap, Camper Shell Shocks, Leer Topper, Canopy Window Lift, Tool Box, - OEM# C16-09209 (Pack of 2)
    Bestseller #1
    OTUAYAUTO 16 Inch Lift Support - 169N/38Lbs Universal Gas Strut - Replacement for Truck Cap, Camper Shell Shocks, Leer Topper, Canopy Window Lift, Tool Box, - OEM# C16-09209 (Pack of 2) (2248)
      【Fitment】This 16 inch lift support struts compatible with fortruck cap, camper shell shocks, leer topper, canopy window lift, tool box, outdoor cabinet, leer trunk parts 【Size】Extended Length (Center-to-Center): 15.7 inch (399mm), Compressed Length (Center-to-Center): 9.4 inch (239mm), 10mm Ball Stud Sockets 【Specificationse】Force: 169N/38Lbs (Per Strut), 338N/76Lbs (Per Set), Interchange number: C16-09209 【Package】2pcs 16 inch 169N/38Lbs lift supports, without screws, installation was easy enough, stronger than the originals ★ GUARANTEE ★ 60-Day return refund and 1-Year quality warranty, we are dedicated to providing 100% customer satisfaction
  • 2 Truck Upfitters 16
    Bestseller #1
    2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts! (141)
      CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation. Truck Upfitters Pair of 45 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys. These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed. Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install. Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
  • 2 Pack 10 inch Gas Prop Force 100N/22LB Gas Struts – Black Gas Springs/Window Lift and Lid Support/Gas Shocks for RV Bed Platform/Floor Hatch/Outdoor Bench/Cabinet/Tool Box/Truck Canopy
    Bestseller #1
    2 Pack 10 inch Gas Prop Force 100N/22LB Gas Struts – Black Gas Springs/Window Lift and Lid Support/Gas Shocks for RV Bed Platform/Floor Hatch/Outdoor Bench/Cabinet/Tool Box/Truck Canopy (796)
      ★Stable Support: Lids soft open gently, angle up to 100 degrees. NOT SOFT CLOSE ★Force:100N/22lbs(Per Strut), Length (From hole center to the other): 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed; 6-1/8'' ★Available working temperature :-11℃~50℃/12℉-122℉, Up to 50,000 times of factory inspections, 1-Year Warranty ★Manufacturer-Direct Sales: High quality, Reasonable price ★Check the size before buy, 10" long EXTENDED, not 10" long cylinder. Missing parts will be replaced with new, please don't hesitate to contact us once you have any question
  • RV Designer G21, Gas Prop Door Support, 20 inch, 10 lb. Load Capacity, Exterior Hardware, regular
    Bestseller #1
    RV Designer G21, Gas Prop Door Support, 20 inch, 10 lb. Load Capacity, Exterior Hardware, regular (386)
      Commonly used on RV entry doors Replace your gas prop by matching its length and force as close as possible One gas prop per package, 20 inch extended length, 10 lbs force If there are 2 props, replace them both to keep door feet balanced
  • C1608054 20
    Bestseller #1
    C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs) (1109)
      ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE! ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly! ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!! ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds; ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!
  • C16-09209 16 inch 38Lbs/169N Gas Shocks Struts for Leer are ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy, Pack of 2PCS Vepagoo
    Bestseller #1
    C16-09209 16 inch 38Lbs/169N Gas Shocks Struts for Leer are ATC Camper Topper Rear Window Truck Cap Camper Shell Canopy, Pack of 2PCS Vepagoo (1076)
      🌳15.71 inch 38Lbs/169N Shocks Struts🌳--A NEW PACKAGE will be offered if any quality defects occur. Welcome to Click "Ask Seller" Besides Your Order for In-time Assistance! 🌳15.71 inch 38Lbs/169N Window Struts🌳--Compressed Length (Center-to-Center): 9.4in (239mm), Extended Length (Center-to-Center): 15.7in (399mm), Force: 38 Lbs (169 N) (Per Strut) 🌳15.71 inch 38Lbs/169N Window Struts🌳--Vepagoo gas shock struts fit for Leer/ARE/Tonneau Camper shell rear window topper door Tonneau Cover lift supports RV Truck Car's window and so on. 🌳15.71 inch 38Lbs/169N Window Struts🌳---Interchange Part Number C16-09209. Easy to install, no special tools required. 🌳15.71 inch 38Lbs/169N Window Struts🌳--End Fiting: 10mm Ball Stud Sockets
  • StrongArm 4339PR Ford F-250 Super Duty Hood Lift Support 1999-05, Pair Pack of 2
    Bestseller #1
    StrongArm 4339PR Ford F-250 Super Duty Hood Lift Support 1999-05, Pair Pack of 2 (1195)
      Exact fit, OE quality design ensures easy installation and operation No special installation tools required Rubber O-Ring piston seal forces the fluid efficiently through the valving components providing consistent performance Patented Multi-Lobe Seal makes gas springs more tolerant to vibration and temperature extremes Individually tested for performance and reliability
  • 2 Pcs Rear Liftgate Lift Supports Struts Shocks Fits 00-04 Chevrolet Suburban 1500/2500,99-04 Cadillac Escalade,99-04 GMC Yukon,95-04 Chevrolet Tahoe 4557
    Bestseller #1
    2 Pcs Rear Liftgate Lift Supports Struts Shocks Fits 00-04 Chevrolet Suburban 1500/2500,99-04 Cadillac Escalade,99-04 GMC Yukon,95-04 Chevrolet Tahoe 4557 (490)
      Placement on Vehicle: Rear Lift gate Left & Right Fit For:00-04 Chevrolet Suburban 1500/2500,99-04 Cadillac Escalade,99-04 GMC Yukon,95-04 Chevrolet Tahoe Reference Number:4557,SG230056,8196034,15734731,15766375,SG230028 Extended Length[in]:24.69 Compressed Length[in]:15.69 Exact Fit, OE Quality Design Ensures Easy Installation and Precise Operation
  • Also read Swim trunks for fat guys Also read Euphoria movie poster Also read Rolling coolers Also read Galaxy art canvas

Leave a Reply

Your email address will not be published. Required fields are marked *